wild boar belt buckle

Fabricated Sterling. 1 5/8 x 2 11/16 inches.


This was made sometime ago, I pulled it out of the closet and refurbished it. Perhaps you’d like to wear it? It’s designed to fit a 1 1/2 inch wide belt. It’s made out of 14 gauge Sterling sheet, so it’s very robust. It weighs 1.83 ounces.


The wild boar is perhaps in an usual symbol for us today, however, in the Celtic and Saxon  worlds the wild boar was a symbol of strength and ferocity.  

The boar design is not original. It’s a very literal copy of some old pieces. 

The boar image is acid etched into the silver. The entire piece was covered with asphalt and after it hardened the image was drawn using a stylus to scratch through the asphalt. The whole piece was then submerged in acid and where the silver was exposed the acid etched a deep line.


Here’s the hardware on the back.


And another view highlighting the image. 

Advertisements

belt buckle

IMG_9696

Forged Sterling (1.48 oz).  The tongue is 2″ long.  The buckle fits a 1 1/8 belt.

IMG_9681

The buckle will be attached to the belt with the rivet going through the tongue.  The excess will be trimmed off then.  The loop at the top end of the rivet will stay.  Kind of weird, I know.  But I like the looks.

IMG_9692

This is the loop on the rivet that will stay.  When the belt is worn, this loop will be at the top.

IMG_9693

The reverse.

IMG_9688

The dimension is more visible on this view.  It’s substantial.

IMG_9689

Another angle.

IMG_9685

One last view.  If you’d like it, send me the belt you’d wear it on and I’ll attach it.  If the loopy rivet it too far out there for you I can replace it with a more standard, plain one (see the post from June 20).  $225.